Removal
1. Disconnect the cable from the damper rod.
2. Loosen the cable sheath fastening nuts and remove the sheath from the bracket.
3. In the passenger compartment, remove the lower panel on the driver's side by unscrewing the screws and releasing the latches.
4. Disconnect the cable from the pedal by pulling the cable out and pushing it upward.
5. Loosen the bolts securing the cable holder to the engine compartment bulkhead and remove the cable, pulling it into the engine compartment.
Installation
1. Installation is carried out in reverse order.
2. When laying the cable, ensure clearances of at least 5 cm from moving parts.
3. On the engine compartment bulkhead, lubricate the shell with sealant to prevent water from entering the cabin.
Adjustment
There is no specific procedure for adjusting the throttle cable. Only the kick-down mode cable is adjustable.