Removal and installation
1. Disconnect the supply hose from the working cylinder.
2. Check the inner surface of the cylinder for burrs and traces of corrosion.
3. Check the piston for wear, scoring and cracks.
4. Check the tappet for wear or damage. If damage is found, replace the parts with new ones from the repair kit.
5. Apply lithium-based grease to the piston in the areas shown in the figure.
6. After assembling and installing the slave cylinder, bleed the clutch hydraulic drive and check for leaks.
Clutch slave cylinder. 1 - working cylinder, 2 - bleed nipple, 3 - dust cover, 4 - pusher, 5 - piston, 6 - spring.
Publication Reprinted from a web portal [www.ToyotaMAN.ru]