Note: Installation is in the reverse order of removal.
1. Remove the refrigerant from the system.
Note: After installation, evacuate the system and charge the system with refrigerant. Check the tightness of the system.
2. Disconnect the plug from the negative plug of the storage battery.
3. Remove finishing of a forward rack.
4. Remove the instrument panel assembly.
5. Remove the electronic engine control unit.
6. Remove the electronic door lock control unit.
7. Disconnect the pipes from the air conditioner unit.
8. Disconnect the intake duct.
Disassembly and assembly
Note: Assembly is in the reverse order of disassembly.
1. Detach the top cover.
2. Remove the evaporator from the bottom casing.
3. Disconnect the expansion valve from the evaporator.
Evaporator.
1 - top casing,
2 - evaporator,
3 - expansion valve,
4 - lower casing.