13" rims
14" rims
2. Install the seal and piston s cylinder.
3. Install the boot and cylinder boot snap ring.
4. Install dust covers and guide pins.
(13" rims)
A) Install four new dust covers.
b) Make sure the dust covers fit snugly into the grooves of the caliper bracket.
V) Insert two guide pins into the caliper bracket.
Attention: when assembling, please note that the sleeve is installed with the lower guide pin.
(14" rims)
A) Install two new dust covers.
b) Make sure the dust covers fit snugly into the grooves of the caliper bracket.
V) Insert two guide pins and bushing into caliper bracket.
G) Install the caliper bracket and tighten the mounting bolts.
- Tightening torque - 96 Nm