2. Check wheel runout.
- Runout - less than 3.0 mm
3. Check up an axial backlash of bearings of naves.
4. Check up reliability of fastening of details of a suspension bracket.
5. Check up a condition of steering drafts.
6. Check up correct work of shock-absorbers.
7. Measure the installation height of the vehicle.
Note:
- - Front Suspension: Measure the distance from the ground to the center of the front lower arm mounting bolt.
- - Rear suspension: measure from the ground to the center of the trailing arm mounting bolt. Before checking the wheel alignment, it is necessary to adjust the installation height in accordance with established standards.
- - If the installation height does not meet the established standards, then you should try to correct it by pushing the body down or lifting the body up.