2. Using the special tool, remove the inner oil seal.
3. Remove the lower ball joint.
- A) Remove the cotter pin and unscrew the nut.
- b) Using a puller, remove the lower ball joint.
4. Remove the hub.
- A) Using the special tool, remove the hub.
- b) Using the special tool and a press, remove the bearing inner race from the hub.
5. Turn away four bolts and remove a splash guard.
6. Using the special tool, remove the retaining ring.
7. Using the special tool, remove the outer oil seal.
8. Using a special tool and a press, remove the bearing from the steering knuckle.