Contents: Examination ↓ Replacement ↓
Examination
1. Place the vehicle on a flat, horizontal surface.
2. Unscrew the filler plug. Make sure that the oil level in the gearbox housing (transfer case) corresponds to the norm. If necessary, add oil to the crankcase.
3. The oil level in the crankcase should not be less than 5 mm from the edge of the filler hole.
Transfer case.
1 - filler plug,
2 - drain plug.
Manual transmission.
Replacement
1. To drain the oil, unscrew the filler and drain plugs. The gearbox must be warmed up (be careful not to burn yourself with hot oil).
View the original source on the website (ToyotaMan.ru)
2. After draining the oil, screw in and tighten the drain plug.
- Tightening torque - 30 - 50 Nm
3. Fill with oil and install the filler plug.
Transmission:
- oil quality according to API — GL-3
- oil viscosity according to SAE — 75W-90
- volume of oil to be filled - 2.1 l
Transfer case:
- oil quality according to API — GL-3
- oil viscosity according to SAE — 75W-90
- volume of oil to be filled - 0.4 l
Tightening torque - 30 - 50 Nm
4. After installing the filler plug, check the transmission and transfer case for oil leaks or damage.