2. Unscrew the filler plug.
3. Make sure that the oil level in the gearbox casing is below the edge of the filler plug hole. If necessary, add oil to the casing.
4. The oil level in the crankcase should not be less than 5 mm of the filler hole.
Caution: Be careful, the oil in the crankcase may be hot immediately after driving.
- Tightening torque of the plug - 54 - 69 Nm
Recommended oil viscosity according to SAE
- Duet — 85W-90
- Sirion — 80W - 90
Filling volume:
- Duet, Sirion since 2001 - 1.0 l
- Sirion before 2001 - 1.3 l
Rear axle gearbox.
1 - satellite,
2 - satellite axis,
3 - retaining ring,
4 - axle gear,
5 - washer,
6 - bearing,
7 - differential cup,
8 - driven gear,
9 - drive gear,
10 - bushing,
11 - lock nut,
12 - bolt,
13 - bearing holder,
14 - gearbox housing,
15 - automatic all-wheel drive clutch,
16 - cover.
(The material is republished from an online website: ToyotaMAN.ru)