2. Turn away a jellied stopper and check up level of working liquid in a reducer of the back bridge. The oil level in the crankcase should be under the cut of the filler hole. Add oil if necessary.
3. If necessary, change the oil in the rear axle gearbox.
- A) Warm up the oil in the rear axle gearbox - for this you need to drive several kilometers.
- b) Remove the drain plug and filler cap. Drain the engine oil.
- V) Close the drain plug.
Tightening torque - 49 Nm
G) Fill in new oil.
Technical data:
- Oil class according to API - GL-5
- Recommended viscosity - SAE 75W-90, 80W-90
- Oil volume - 0.9 l
d) Close the filler cap.