Removing and checking the central tie rod
1. Disconnect the tie rod assembly from the central tie rod by first removing the cotter pin and unscrewing the nut.
2. Disconnect the pendulum arm by first removing the cotter pin and unscrewing the nut.
3. Disconnect the central steering rod from the rod of the mounting lever, having previously removed the cotter pin and unscrewed the nut.
Installing the central tie rod
1. Connect the center tie rod to the center arm link, then connect the pendulum arm and tie rod assembly to the center link and tighten with nuts.
2. Tighten the center arm link with a nut and install a new cotter pin.
- Tightening torque - 91 Nm
3. Tighten the pendulum arm nut.
- Tightening torque - 59 Nm
4. Tighten the tie rod assembly nut.
- Tightening torque - 91 Nm