Rear Wheel Hub and Knuckle (4WD) — Disassembly [Toyota Carina T190]

1. Using a puller, remove the hub from the knuckle.



2. Using a special tool and a press, remove the inner bearing ring from the hub.



3. Unscrew the four nuts securing the brake shield.



4. Remove the seals from the knuckle.



5. Remove the retaining ring.



5. Remove the bearing from the knuckle.

a) Install the inner ring onto the bearing.

The material was taken from a resource toyotaman

b) Using a special tool and a press, remove the bearing.