Disassembly
1. Remove the ignition distributor cover and gasket by unscrewing 3 bolts.
2. Remove the ignition distributor rotor.
Examination
Rotate the distributor drive shaft making sure there is no binding or noticeable play. Otherwise, replace the distributor housing assembly.
Assembly
1. Install the distributor rotor, first aligning the recess on the angle pulse sensor rotor with the protrusion on the ignition distributor rotor.
Then fix the ignition distributor rotor with two screws.
2. Install the distributor cap onto the distributor body using a new O-ring.
Then secure the distributor cap with two bolts.