Drain the coolant.
Remove the top radiator shroud.
Remove the coolant expansion tank assembly.
Remove the air filter assembly.
Remove the battery.
Removing
Pic. 7.24. Starter mounting bolts
Loosen the nut and disconnect terminal 30 (pic. 7.24).
Pic. 7.25. starter connector
Disconnect starter connector (pic. 7.25).
Pic. 7.26. Starter mounting bolts
Remove 2 mounting bolts and remove starter (pic. 7.26).
Installation
Install the starter assembly.
Tightening torque: 37 Nm for bolt, 9.8 Nm for terminal 30.
Install the battery.
Tightening torque: 5.0 Nm for bolt, 3.5 Nm for nut.
Install the air filter assembly.
Install the coolant expansion tank assembly.
Install the upper radiator shroud.
Connect the negative terminal to the battery terminal.
Fill with coolant.
Check for coolant leaks.