Attention! Wear gloves to avoid cutting your hands on the edges of the technological windows in the door frame!
1. On models equipped with power windows and a single lock, disconnect the negative cable from the battery.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. Remove the interior upholstery panel and plastic moisture shield from the door (see Section Removal and installation of panels of an internal upholstery of doors).
Lock latch assembly
1. Highlighting yourself with a flashlight, try to determine the order of connecting the actuating rods to the latch. Disconnect stem (And) from the castle.
2. On models equipped with door actuators, disconnect the appropriate wiring harness.
3. Remove the fixing screws (refer to accompanying illustration) and remove the latch assembly from the door.
6 Install in reverse order. Track reliability of a tightening of fixture.
Outside handle and door lock cylinder
1. Remembering the order of connection of the components, disconnect all the actuating rods connected to the outside door handle and the lock cylinder (refer to accompanying illustration).
2. Turn out fixing bolts (refer to accompanying illustration) and remove the outside handle from the door.
3. Installation is carried out in the reverse order. Track reliability of a tightening of bolts.
Internal handle
Removal of the internal handle is made in the course of dismantling of the panel of an internal upholstery of a door (see Section Removal and installation of panels of an internal upholstery of doors).