Warning! If the car stereo system is equipped with a security code, make sure you have the correct combination to activate the audio system before disconnecting the battery!
2. Disconnect the electrical wiring from the headlight socket.
3. Remove the waterproof screen (refer to the accompanying illustration).
4. Remove the cartridge holder.
5. Remove the socket with the lamp installed in it (refer to the accompanying illustration).
6. Installation is carried out in reverse order.
Attention! Try not to touch the bulb of the new lamp with bare fingers, if necessary, carefully wipe the glass of the bulb with an alcohol solution, the presence of greasy stains on the bulb leads to rapid overheating of the assembly!