Installation details of coil assemblies
1. Disconnect the negative cable from the battery.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. Remove the inlet pipeline.
3. Having previously marked, disconnect the connectors from the ignition coils (refer to illustration above).
4. Give bolts of fastening and remove coils of ignition from a head of cylinders.
5. Installation is carried out in the reverse order. Make sure all coils are properly installed. Tighten the fastening bolts to a torque of 78 Nm. Start the engines and make sure it works properly.