When the key is turned to position «ON», the glow plug indicator lights up. It goes out when the glow plugs are hot enough to start the engine. The waiting time depends on the engine temperature.
This key position is normal for driving mode. To avoid battery drain, the key must not be left in the «ON», if the engine is not running.
«START» - the starter is on.
Before starting the engine, place the shift lever in neutral and depress the clutch pedal. Release the key as soon as the engine starts. He will return to position «ON». Do not run the starter without interruption for more than 30 seconds.
«ACC» — current consumers such as radio are switched on, but the motor is stopped.
«LOCK» - the steering wheel is locked. The key can only be removed in this position.
To turn the key to position «LOCK» from the provisions «ON» or «ACC», you need to press the lock button. If the key gets stuck in the position when starting the engine «LOCK», first make sure the key is fully inserted, and then carefully turn the key until the steering wheel moves back and forth.
While the car is moving, under no circumstances should you press the steering wheel lock button, turn the key to the «LOCK» or remove the key, as this will lock the steering wheel and make it impossible to steer the vehicle. If it is necessary to stop the engine while driving, the key must only be turned to the position «ACC». Never press the lock button or remove the key.