The clutch fluid reservoir is located in the engine compartment near the brake booster. The screw cap of the tank has a hole that must always be open.
The fluid container is transparent. Thus, the liquid level in it can always be visually checked. It is recommended to carry out such control every four weeks.
When filling the clutch fluid, use SAE J 1703, DOT3 or DOT4 specification brake fluid.
Check if the fluid level is between the MIN and MAX marks. If it is below the MIN·mark, then it is necessary to check the tightness of the hydraulic system. If the system is tight, then the clutch disc is worn out.