2. Remove the fill plug. Make sure the oil level in the crankcase is under the cut of the filler plug. Add oil to the crankcase if necessary.
Attention: be careful, immediately after driving the oil in the crankcase may be hot.
Oil class according to API - GL-5
Recommended oil viscosity (temperature dependent) according to SAE:
- Above -18°C - SAE 90
- Below -18°C - SAE 80W or 80W-90
Filling capacity:
- Front axle gearbox - 1.9 l
- Rear axle gearbox - 1.85 l
Attention: for the rear axle gearbox with a limited slip differential, use a special oil (for LSD).
3. After installing the fill plug, check the gearbox housing and axle for oil leaks or damage.