- Place the rear of the car on stands and remove the rear wheel.
- Unscrew the bolts and nuts of the rod from the body and from the wheel hub bracket and remove the rod.
Installation is carried out in the reverse order. The nuts have projections that fit against the flange of the mounting bracket on the body side, and on the shock absorber strut side they should fit into the mounting recesses. Do not tighten the bolts yet. Put the car on its wheels and pump it several times. Then tighten the bolts at the ends of the longitudinal rods with a tightening torque of 115 Nm. Do not tighten the nuts.