Disc brakes
1. Remove the wheel and temporarily secure the brake disc with wheel nuts.
2. Through the control hole in the caliper, check the thickness of the brake pads.
- The minimum thickness of the brake pads is 1.0 mm
Nominal brake pad thickness for wheels:
- front (13 inches) - 10 mm
- front (14 inches) - 12 mm
- rear - 10 mm
Replace pads if necessary.
3. Install the wheel
- Tightening torque - 105 Nm
Rear drum brakes
1. Remove the inspection hole plug and check the thickness of the brake pads through it.
- Minimum thickness - 1.0 mm
- Nominal thickness - 4.0 mm
If the thickness of the lining is less than the minimum, then replace the brake pads.