Contents: Removal ↓ Installation ↓
Removal
1. Jack up the car and remove the rear wheels.
- Tightening torque - 105 Nm
2. Remove the stabilizer struts.
Note: If the ball joint axle rotates with the nut, use a socket wrench to hold the strut in place.
- Tightening torque - 65 Nm
3. Loosen the bracket mounting bolts and remove the anti-roll bar.
Tightening torque:
- 2WD — 20 Nm
4 WD:
- Bolt A - 20 Nm
- Bolt B - 55 Nm
 |  |
Installation
1. Installation is carried out in the reverse order of removal.
[The original is published on the website ToyotaMan]
2. When installing, align the marks made during removal.