2. Remove the central muffler pipe.
3. Disconnect the cardan shaft from the rear axle gearbox.
A) Mark the propeller shaft and gearbox shaft.
b) Turn away four bolts and disconnect cardan shaft.
4. Turn away three bolts and disconnect a cable of a parking brake.
5. Turn away two bolts and remove the trailing arm.
6. Remove the #2 lower control arm.
A) Place match marks on the camber adjustment eccentric bushing and subframe.
b) Remove the bolt, remove the eccentric and disconnect the lever from the subframe.
V) Loosen the nut, remove the bolt, washer and lever from the knuckle.
7. Remove the #1 lower suspension arm.
A) Loosen the bolt securing the lever to the knuckle.
b) Loosen the bolt securing the arm to the rear beam.
V) Jack up the rear beam.
G) Loosen the nut and remove the rear beam bushing.
d) Remove the three bolts of the #2 lower suspension arm bracket.
e) Lower the rear beam and disconnect the lower suspension arm No. 1 from it.
Attention: do not lower the rear beam further than necessary to unscrew the bolt.