Rear Anti-Roll Bar Installation Components
1. The anti-roll bar installation components are shown in the illustration above.
2. Support the front wheels with wheel chocks. Jack up the rear of the car and place it on supports.
3. Loosen the mounting bolts and nuts and remove both stabilizer struts (refer to the accompanying illustration).
4. Unscrew the bolts of the rod mounting brackets (refer to the accompanying illustration).
5. Remove the anti-roll bar from the vehicle.
6. Assess the condition of the rubber bushings and replace any defective components.
7. Installation is carried out in the reverse order. Make sure that all fasteners are tightened to the required force.