Replacing the front axle hub bolt [Toyota Carina T190]

1. Jack up the car, remove the front wheel.

2. Remove the caliper assembly and brake disc.

Attention:

• - do not disconnect the brake hose
• - apply marks on the disk and hub
• - Avoid getting oil on the disc.

3. Using a special tool, unscrew the hub bolt.



4. Install the hub bolt.

a) Install the washer and nut onto the hub bolt as shown in the figure.



(Publication Reprinted from a web portal: ToyotaMAN)

b) Tighten the nut and install the bolt.

5. Install the brake disc and caliper assembly.

• Tightening torque - 96 Nm

Note: Align the marks made during removal.

6. Install the front wheel and lower the vehicle.

• Tightening torque - 105 Nm