Removing
Mark the position of the wheel disc relative to the hub so that the balanced wheel can be reinstalled in its original position.
Loosen the wheel nuts from the vehicle that is on the ground.
Raise the front of the car.
Remove wheel.
Loosen screws at marked points. Press the front wheel locker inward from the fender and remove it.
Installation
Before installing the locker, check the condition and position of the spacer nuts in the wheel well. Replace old nuts if necessary.
Insert locker into wheel well and secure with bolts.
Install and secure the wheel with nuts, observing the previously marked markings. Put the car on the wheels and tighten the nuts crosswise with a force of 105 Nm.