Contents: Checking the travel of the parking…↓ Adjusting the travel of the parking…↓ Table 6.6. Technical characteristics…↓ Table 6.7. Nominal tightening torques ↓
Remove the rear wheel.
Adjust the parking brake shoe clearance.
Install the rear wheel.
Tightening torque: 103 Nm.
Checking the travel of the parking brake lever
Fully tighten the parking brake lever and count the number of clicks.
Parking brake lever travel: 6–9 clicks with 196 N applied force.
Adjusting the travel of the parking brake lever
Remove the top panel of the console.
Remove the rear end panel of the console.
Remove the storage box on the console.
Fig. 6.18. Parking brake adjusting nut
Loosen the lock nut and, by turning the adjusting nut, set the nominal value of the parking brake lever stroke (Fig. 6.18).
Parking brake lever travel: 6–9 clicks with 196 N applied force.
Tighten the lock nut.
Tightening torque: 5.0 Nm.
Check the travel of the parking brake lever by tightening and releasing it 3-4 times.
Check to see if the parking brake is sticking.
Make sure that the indicator lamp comes on when the parking brake lever is moved.
Test conditions: The parking brake indicator lamp should come on after the first click.
Table 6.6. Technical characteristics for testing and adjustment work
Table 6.7. Nominal tightening torques
