Attention! See the warnings at the beginning of the Section Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system and the switch of the last.
Screws of fastening of a combination of devices
1. Disconnect the negative from the battery both wires (first negative).
2. Remove the steering wheel (see chapter Suspension and steering).
3. Remove the center section of the instrument panel trim (see chapter Body).
4. Remove the fixing screws (refer to illustration above), remove the instrument cluster from its mounting socket and disconnect the electrical wiring.
5. Remove the protective glass.
6. After removing the lamp holders and unscrewing the screws securing the printed circuit board, remove the latter from the back of the instrument cluster.
7. Turn out screws of fastening of devices and remove devices.
8. Installation is carried out in the reverse order. Remember that the negative wire is always connected to the battery last.