| Clearance between brake booster pushrod and master cylinder piston | |
| Disc brakes: | |
| – thickness of linings: | |
| • standard | 10,0 |
| • ultimate | 4,0 |
| – thickness of handbrake lining: | |
| • standard | 4,0 |
| • ultimate | 1,0 |
| - disc runout | no more than 0.15 |
| – maximum disk thickness | cast on disk |
| – inner diameter of the handbrake disc: | |
| • standard | 230 |
| • ultimate | 231 |
| Drum brakes: | |
| – thickness of linings: | |
| • standard | 6,5 |
| • ultimate | 1,5 |
| – maximum drum diameter | cast on disk |
Tightening torques (Nm)
| Caliper halves tie bolts: | |
| - front | 110 |
| - rear | 78 |
| Front Caliper Bolts | 52 |
| Rear Caliper Bracket Bolts | 92 |
| Front brake disc to hub mounting bolts: | |
| – until 1990. | 41 |
| – since 1991. | 65 |
| Brake hose nipple bolt | 27 |
| Wheel cylinder mounting bolts | 8,4 |
| Nuts securing the master cylinder to the vacuum booster | 10,8 |
| Vacuum booster mounting nuts | 10,8 |
| Bolts for mounting the pressure regulator, triggered by vehicle loading | 10,8 |
| Wheel nuts | 110 |
(The original version is published on the website ToyotaMan.ru)