Brand of brake fluid | See subsection 2.1. |
Adjustment data of the brake pedal | See subsection 2.1. |
Gap between vacuum booster rod and brake master cylinder piston | 0 mm |
Brake Switch Adjustment (Dimension A for circuit breaker plunger) | 0.8 - 2.4 mm |
Disc brakes | |
Maximum pad thickness | |
– front brakes | |
• standard | 2.8 mm |
• ultimate* | 2.6 mm |
– rear brakes (on models with rear disc brakes), Camry and Camry Solara models | |
• standard | 0.89 mm |
• ultimate* | 0.80 mm |
Brake Disc Runout | |
– front brakes | 0.05 mm |
– rear brakes | 0.15 mm |
• maximum thickness of parking brake pads | 0.8 mm |
drum brakes | |
Maximum pad thickness | 1.6 mm |
– inner diameter of the drum | |
• standard | 228.6 mm |
• ultimate* | 230.6 mm |
Comment. If values are cast on the disc or drum that differ from those indicated in the table, then refer to the values indicated on the disc or drum.
Tightening torques, Nm
Bolt of fastening of a support to an arm | |
Front brakes | 30 |
Rear brakes | 16,8 |
Brake caliper bracket bolts | |
Front brakes | 95 |
Rear brakes | 41 |
Bolt of fastening of the union of a hose of a brake to a support | 27 |
Bolt of fastening of the wheel cylinder of a brake | 8,4 |
Nut of fastening of a main cylinder of a brake to the vacuum amplifier | 10,8 |
wheel nut | See subsection 2.1. |