Note: check the fluid level in the automatic transmission and the oil level in the transfer case (verification is given in "Maintenance").
1. Press the accelerator pedal all the way down and make sure that the control lever rests against the adjusting screw.
2. Push the accelerator pedal all the way down (for A245E, A241E, A540H - fully release the accelerator pedal) and loosen the adjusting nuts.
3. Adjust the cable so that the distance between the end of the boot and the stopper on the cable is within the allowable range.
- Normal distance, with fully closed valve - 0-1 mm
A241L
1 - stopper,
2 - flexible cover,
3 - adjusting nuts,
4 - external cable.
A245E, A241E, A540H
1 - stopper,
2 - cover,
3 - adjusting nuts.
4. Tighten the adjusting nuts and recheck.