Attention:
- Prolonged and often repeated contact with mineral oil causes the natural oils to be removed from the skin, leading to dryness, irritation and dermatitis. In addition, the motor oils used contain potentially hazardous ingredients that can cause skin cancer.
- Wash your hands thoroughly with soap or other cleaning agent after handling oil.
- Do not use gasoline, thinners or thinners.
1. Drain the engine oil.
A) Remove the oil filler cap.
b) Unscrew the drain plug on the oil pan, drain the oil into a vessel.
2. Replace oil filter.
A) Remove the oil filter.
b) Clean the oil filter mounting surface.
V) Apply clean engine oil to the new oil filter gasket.
G) Screw the filter onto the seat by hand until there is considerable resistance.
d) Tighten the filter an additional 3/4 turn.
3. Fill with engine oil.
A) Clean and install the drain plug with a new gasket. Tightening torque 39 Nm
b) Fill in new engine oil.
Models | With filter change | No filter change | Dry engine |
3L, 2L-T | 6,7 | 5,7 | 7,4 |
KZJ | 7,7 | 7,0 | 8,0 |
Note: on KZ engines, check the oil level on a warm engine 5 minutes after it has stopped.
V) Reinstall the oil filler cap.
4. Start the engine and check for oil leaks.
5. Recheck the engine oil level.