Tools needed to change the oil filter
1. Pallet; 2. Rubber gloves; 3. Wrench handle; 4. Nozzle; 5. Special key for unscrewing the oil filter; 6. Oil filter unscrewing tool
1. Warm up the engine. Remove the oil filler cap.
2. Raise the vehicle and support it on supports.
3. Place a pan under the oil pan drain hole and loosen the plug with a socket wrench. Wait for the oil to drain. Wipe the plug and reinstall it.
4. Place the pan under the oil filter and unscrew the filter by turning it counterclockwise with a special key.
5. Wipe clean the cylinder block and filter installation hole.
The original can be viewed on the website: toyotaman.ru
6. Lubricate the rubber gasket of the new filter with engine oil and screw the filter into place. Screw the filter in by hand until the filter gasket touches the cylinder block. Then turn the filter an additional 3/4 turn.
7. Fill the engine with new oil through the filler neck. Wait for the oil to drain into the pan. Start the engine and check for leaks. Check the oil level. Add oil if necessary.