2. Removing the bracket and accelerator drive levers.
A) Disconnect the levers from the injection pump.
b) Turn away three bolts and remove an arm and levers.
3. Remove the timing belt.
4. Remove the high pressure fuel pipes.
5. Remove the injection pump.
6. Removing the oil dipstick.
A) Loosen the fastening nut and remove the dipstick tube.
b) Remove the rubber ring from the guide tube.
7. Remove the fuel filter.
8. Remove the oil cooler.
A) Turn away two nuts and disconnect a vacuum tube.
b) Remove 13 bolts, remove the oil cooler, its cover and gasket.
9. Remove the oil pressure sensor.
Removing the oil cooler (1KZ-T): 1 - gasket, 2 - oil cooler, 3 - bypass valve, 4 - valve body, 5 - oil pressure sensor, 6 - drain plug, 7 - oil cooler cap, 8 - oil filter, 9 - spring.
10. Removing the radiator cap.
Unscrew 4 nuts, remove the radiator cap and two gaskets.
11. Remove bypass valve
12. Remove the drain plug