KZ series
1. Remove the camshaft position sensor.
2. Remove pushers.
Note: Arrange tappets in order to match valves.
3. Remove valves.
A) Using a suitable tool, compress the valve spring and remove the two cotters.
b) Remove the valve spring plate, valve spring, valve.
V) Using pliers with long jaws, remove the valve stem seals.
G) Remove the spring seat.
Note: Arrange valves, springs, spring seats and spring plates in the order of assembly.
EJ-series
1. Remove the camshaft position sensor.
Dismantling and assembly of a head of the block of cylinders (EJ-series).
1 - camshaft position sensor,
2 - spark plug,
3 - cylinder head,
4 - dust seal,
5 - gasket,
6 - adjusting washer,
7 - pusher,
8 - cracker,
9 - spring plate,
10 - spring,
11 - intake valve,
12 - exhaust valve,
13 - oil scraper cap,
14 - valve spring seat,
15 - valve guide.
2. Remove adjusting washers and pushers.
Note: Arrange tappets in order to match valves.
3. Remove valves.
A) Using a suitable tool, compress the valve spring and remove the two cotters.
b) Remove the valve spring plate, valve spring, valve.
V) Using pliers with long jaws, remove the valve stem seals.
G) Remove the spring seat.
Note: Arrange valves, springs, spring seats and spring plates in the order of assembly.