- 1.6 liter engine with carburetor - 4A-F
- 1.6 l engine, with injection device - 4A-FE
- 2.0 l engine - 3S-FE
- diesel engine - 2C
Number and arrangement of cylinders 4 cylinders, in-line
Valve control:
- gasoline engines - Two overhead camshafts, with 16 valves
- diesel engines - Single overhead camshaft with 8 valves
Cylinder head - Aluminum (Diesel engine - cast iron)
Cylinder diameter:
- 1.6 l engines all - 81.00 mm
- 2.0 l engines and diesel engine - 86.00 mm
Piston stroke:
- 1.6 l engines all - 77.00 mm
- 2.0 l engines - 86.00 mm
- diesel engine - 85.00 mm
Working volume:
- 1.6 l engines all - 1587 cm3
- engines 2.0 l - 1998 cm3
- diesel engine - 1974 cm3
Compression ratio:
- 1.6 l engines all - 9.5:1
- 2.0 l engines - 9.8:1
- — diesel engine — 23.0:1
Maximum power (general values):
- engine 1600, 4A-F - 66 kW (90 hp) at 6000 rpm
- engine 1600, 4A-FE produced before 1991 - 77 kW (105 hp) at 6000 rpm
- engine 1600, 4A-FE produced since 1992 - 79 kW (107 hp) at 6000 rpm
- engine 2000, 3F-SE produced before 1991 - 89 kW (121 hp) at 5600 rpm
- engine 2000, 3F-SE produced since 1992 - 98 kW (133 hp) at 5800 rpm
- diesel engine - 54 kW (73 hp) at 4700 rpm
Maximum torque (general values):
- 1.6 l engines, with carburetor - 135 Nm at 3600 rpm
- 1.6 p engines, produced before 1991 - 145 Nm at 3000 rpm
- 1.6 p engines, produced since 1992 - 137 Nm at 5200 rpm
- 2.0 l engines, produced before 1991 - 176 Nm at 4400 rpm
- 2.0 l engines, produced since 1992 - 183 Nm at 4600 rpm
Note: Power and torque values, depending on the country of destination and the installed engine, catalyst, etc., are not the same on all models.
Compression:
- engine 4A-F/FE - 12.6 kg/cm
- 3S-FE engine (2.0 l) — 13.0 kg/cm
- engine 2C (diesel) —32.0 kg/cm
Minimum compression:
- gasoline engines - 10.0 kg/cm
- diesel engine - 20.0 kg/cm
Valve clearances:
engine 4A-F/FE - engine cold:
- intake valves - 0.15-0.25 mm
- exhaust valves - 0.20 - 0.30 mm
engine 4A-F/FE - engine hot:
- intake valves - 0.20-0.30 mm
- exhaust valves - 0.26-0.36 mm
3S-FE engine - cold engine:
- intake valves - 0.19-0.29 mm
- exhaust valves - 0.28-0.38 mm
diesel engine:
- intake valves - 0.20-0.30 mm
- exhaust valves - 0.25-0.35 mm