2. Unscrew the drain plug and drain the working fluid into a suitable container.
Tightening torque:
- A241L, A241E, A245E - 18 Nm
- A540N - 50 NM
A540N
Except A540H
3. Loosen the pan mounting bolts. Remove the pan and gasket.
Note: Some liquid always remains in the tray. Do not damage the filler tube and sealing ring.
- Tightening torque - 5 Nm
The article was copied from the portal [ToyotaMAN.ru]
Installation instruction: Fix the magnets to the transmission pan as shown in the figure.
Except A245E and A540H
A245E before 1994.
A245E since 1994.
A540H
4. Unscrew the three bolts and remove the filter.
Note: Bolt lengths (in mm) are shown in the figure.
- Tightening torque - 10 Nm
Except A540H
A540N
Installation instructions: Install the gasket into the filter.
Except A245E, A540H
A540N
A245E