Common parameters
Characteristic | Meaning |
Transfer ratio of the main gear of the transfer case (H4/L4) | 1.000/2.488 |
Axial play of the cardan joint, mm | 0.05 |
Runout of the front differential flange, mm | 0.1 |
Front hub bearing preload, Nm | 28 ÷ 56 |
Rear hub bearing preload, Nm | 26 ÷ 57 |
Front differential drive gear preload, Nm | 0.4 ÷ 0.8 |
Rear differential drive gear preload, Nm | 0.6 ÷ 1.0 |
Depth of installation of an epiploon of differential, mm | 1 |
Distance from the cut of the axle housing to the end face of the nut, mm | 0.2 ÷ 0.9 |
Tightening force of threaded connections, Nm
Cardan shafts
Bolts of fastening of the top dustproof cover
Characteristic | Meaning |
Flange bolts/nuts | |
front shaft | 74 |
rear shaft | 88 |
Shaft Dust Cover Fasteners | |
bottom cover | |
bolts | 17 |
nuts | 13 |
Top cover (refer to illustration above) | |
Bolts A | 36 |
Bolts B | 23 |
Drive shafts and axle shafts
Characteristic | Meaning |
Wheel bearing preload adjusting nut, Nm | |
1st stage | 59 |
2nd stage (after turning the hub) | 59 |
3rd stage | loosen to rotate by hand |
4th stage | 5 |
Front differential flange nut | 196 |
Rear differential flange nut | 245 |
Tightening force of the differential flange nut in one pass | 13 |
Maximum tightening torque of the front differential flange nut | 343 |
Maximum tightening torque of the rear differential flange nut | 441 |
Nuts of fastening of forward differential | 25 – 27 |
Rear differential mounting bolts | 73 |
ABS sensor mounting bolt | 18 |
Clips of fastening of conducting of the gauge ABS | 8 |
Wheel nuts | 131 |
Nuts of fastening of the case of a nave | 31 |
Nut of the bearing of a nave | 274 |
Hub cap bolts | 10 |
Bolts of fastening of a protective casing to a rotary fist | 18 |
Brake disc to hub | 64 |
Flexible hose to brake caliper | 30 |
shock absorber to frame | 25 |
Shock absorber to lower suspension arm | 39 |
Stabilizer bracket to frame | 29 |