- type 1: without gear;
- type 2: with planetary gear.
Type 1
1. Disconnect a wire from the traction relay.
2. Turn away two nuts of fastening of the traction relay.
3. Remove the traction relay from a cover of a starter.
4. Remove the starter cover by removing the two screws.
5. Remove the brush holder insulator.
6. Remove the springs and brushes from the brush holder.
Disassembly and assembly of the starter (type 1).
1 - traction relay,
2 - bolt,
3 - starter cover,
4 - brush holder insulator,
5 - spring,
6 - brush holder,
7 - stator,
8 - anchor,
9 - lever,
10 - starter cover on the drive side,
11, 13 - thrust bushing,
12 - retaining ring,
14 - overrunning clutch.
7. Remove the brush holder.
8. Remove the armature from the stator.
9. Remove the lever and anchor from the starter cover on the drive side.
10. Using the special tool, remove the thrust bushing from the retaining ring.
11. Remove the retaining ring.
12. Remove the freewheel from the shaft.
Type 2
1. Disconnect a wire from the traction relay.
2. Turn away two nuts of fastening of the traction relay.
3. Remove the traction relay from a cover of a starter.
4. Remove the drive side starter cover by removing the two pinch bolts.
5. Turn away two screws and disconnect a cover of a starter from a stator.
6. Disconnect the stator and center bearing.
7. Remove armature from stator.
Disassembly and assembly of the starter (type 2).
1 - traction relay,
2 - stator,
3 - starter cover,
4 - brush holder,
5 - anchor,
6 - overrunning clutch,
7 - central bearing,
8 - lever,
9 - starter cover on the drive side,
10 - satellites,
11 - retaining ring,
12 - bearing,
13 - epicycle,
14 - carrier.
8. Remove the brushes from the brush holder by depressing the springs.
9. Remove the plate from the center bearing.
10. Remove satellites.
11. Using the special tool, remove the thrust bushing from the retaining ring.
12. Remove the circlip from the shaft. Remove the freewheel from the shaft.
13. Remove the circlip and carrier from the center bearing.
14. Remove epicycle from center bearing.