Side turn signal lamps
1. On early release cars (FJ60, 62) unscrew the screws of the turn signal cover and remove the cover.
2. On late production cars (FJ80) unscrew the top screw fixing the pointer.
3. Remove the turn signal housing and disconnect the connector. Turn the lamp holder counterclockwise and remove from the housing.
4. The lamp is installed in reverse order.
Front direction indicator lamps
1. Loosen the fixing screws (indicated by arrows) optical element of the pointer.
2. Turn the holder counterclockwise and remove.
3. The lamp is installed in reverse order.
Brake, taillight and rear turn signal lamps
1. On early release cars (FJ60, 62) unscrew the cover screws. Remove the bulb by pushing in and turning counterclockwise.
2. On late production cars (FJ80) open the rear compartment door and unscrew the screws securing the rear light housing in the door opening, then unscrew the cover screw and remove the rear light assembly.
3. Remove the holder by turning counterclockwise and pulling out the bulb.
4. Installation is carried out in the reverse order.
License plate lamp
1. Loosen the mounting screws and remove the cover, then remove the lamp.
2. The lamp is installed in reverse order.
Instrument panel illumination lamp
1. Remove the instrument panel (see subsection 11.10). The lamp comes from the back of the shield.
2. To remove, turn the bulb counterclockwise.
3. Installation is carried out in the reverse order.