Attention! Early production vehicles are equipped with cable-operated interior heating/air conditioning. On cars of later releases, an electric drive is installed with air intake dampers.
Removal and installation
1. Disconnect the battery from the ground.
2. Remove decorative trims of the middle panel.
3. Remove the regulator heads.
4. Loosen the fixing screws on the front side of the control panel.
5. Slightly pull the panel towards you.
6. On vehicles with throttle cable, turn the flags and remove the control cables.
7. On vehicles with electric air dampers, disconnect the connectors.
8. Installation is carried out in the reverse order.
9. Check the operation of the heating system (and air conditioning, if available).