After fixing the cables on the control panel and after mounting the control panel itself, it is necessary to adjust the tension of the cables.
1. Move the control handles to the RECIRC, COOL and DEF positions.
2. To adjust the air intake flap control cable, move the flap control lever to the FRESH position and secure the cable in place.
3. For adjusting the mixing flap control cable (air temperature controller) move the damper to the COOL position. Secure the cable sheath collar in place by pulling the sheath lightly.
4. To adjust the mixing damper control cable, set the damper to the DEF position. Put on the cable eyelet and secure the cable sheath clamp.