Adjustment
1. Raise and secure the front of the vehicle.
2. Remove the protective shields covering the space between the front of the vehicle and the lower cross member.
3. Loosen the shift lever nut on the gearbox (arrow).
4. Set shift lever to park position (all the way up), and then two clicks down to neutral (4-cylinder models, A140E gearbox).
5. Set shift lever to park position (all the way down), and then two clicks up (6-cylinder models, A541E gearbox).
6. Set the shift lever in the passenger compartment to the neutral position.
7. Tighten the lock nut.
8. Check how the shift lever and gearbox function.
Replacement
1. Disconnect the cable from the shift lever on the gearbox (nut is indicated by an arrow).
2. Remove the large cable lock (indicated by an arrow), located above the lever. Disconnect the cable from the bracket.
3. Loosen the cable retainer bolts (indicated by arrows), located on the dividing wall.
4. Remove the center panel.
5. Remove the large cable lock.
6. Remove the wire retainer, knock out the locking pin (indicated by an arrow) and disconnect the cable from the shift lever.
7. Remove the rope.
8. Installation is carried out in the reverse order of removal.