Remove the glove box cover assembly.
Removing
Disconnect the wire harness clamp.
Pic. 2.569. Engine ECU connectors
Disconnect 4 engine ECU connectors (pic. 2.569).
Pic. 2.570. Engine ECU Mount
Remove the bolt and screw, then remove the engine ECU (pic. 2.570).
Pic. 2.571. Bracket No. 1 Engine ECU
Remove 2 screws and remove engine ECU bracket #1 (pic. 2.571).
Pic. 2.572. Bracket No. 2 Engine ECU
Remove 2 screws and remove engine ECU bracket #2 (pic. 2.572).
Installation
Install the #2 bracket to the engine ECU and secure with 2 screws.
Tightening torque: 3.0 Nm.
Install Bracket #1 Engine ECU and secure with 2 screws.
Tightening torque: 3.0 Nm.
Fix the engine ECU with the bolt and screw.
Tightening torque: 5.0 Nm for bolt, 3.0 Nm for screw.
Connect the 4 engine ECU connectors.
Install the wire harness clamp.
Install the glove box cover assembly.
Connect the negative terminal to the battery terminal.
Tightening torque: 5.4 Nm.