Car headlights and lighting Toyota Camry 1 (XV10)

Replacing headlight bulbs
Warning! Before replacing an external light bulb, check the corresponding electrical circuit and fuse. Do not touch the glass bulb of the bulb with bare hands. The fingerprint evaporates and settles on the reflector,...

Headlight adjustment
Location of headlight adjustment screws Correct adjustment of headlights is of great importance for traffic safety. Precise adjustment is only possible with a special device. To adjust the headlights, screws are used...

Headlight — removal and installation
1. Remove the ground cable from the battery. 2. Remove the parking light and radiator grille. 3. Unscrew the bolts and nuts securing the headlight. 4. Disconnect the electrical connector from the headlight bulb holder...

Turn signals and side lights — replacing bulbs
Front side light mounting elements Location of mounting screws and sequence of removal of side light and turn signal light from front bumper 1. Open the hood and remove the screw that secures the side light to the...

Tail light — replacing bulbs
Rear lamp mounting elements on "sedan" cars Mounting of the rear light on vehicles with a "station wagon" body 1. On saloon models, unscrew the screws and remove the tail light (see Fig. Fastening elements of the tail...

High Brake Light — Bulb Replacement
"Sedan" body models 1. On pre-1993 models, pull the shade out and replace the bulb by simply pulling it out of the holder. 2. On 1994 and later models, remove the two screws, lift the shade off and turn the bulb holder...

Instrument cluster lighting — replacing bulbs
1. Remove the instrument cluster. 2. Turn the bulb holder counterclockwise and remove it from the instrument cluster board. Pull the bulb out of the holder. 3. Installation is carried out in the reverse order of removal.

Number Plate Light — Replacing Bulbs
1. On sedan models, unscrew the screws securing the lamp, remove the lamp and take out the bulb. 2. On station wagon models, remove the screw, turn and remove the light, then turn the bulb holder counterclockwise and...

Interior lighting — lamp replacement
Replacing the interior light bulb Replacing the personal interior lighting bulb Replacing the glove compartment light bulb 1. Remove the lampshade by pulling it towards you. 2. Remove the interior light bulb from the...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Similar sections for other Toyota models

➥ Headlights and lighting Toyota Carina T190 (1992-1996)
➥ Lighting system Toyota Corolla E80 (1983-1990)
➥ Lighting and signaling Toyota Corona T190 (1992-1997)

Link in different formats to this article

TEXTHTMLBB Code