Car front and rear suspension Toyota Camry 1 (XV10)

Suspension specifications
Tightening moments Front suspension Lower ball joint: - to the lower arm 108 Nm - to the steering knuckle 110 Nm Lower arm: - front bolts 180 Nm - rear bolt 180 Nm Anti-roll bar Anti-roll bar link: – from 1992 to 1993...

General information about suspension and steering
Steering and suspension components 1 – steering gear; 2 – transverse lever; 3 – lower ball joint mounting bolts; 4 – rack; 5 – anti-roll bar rods Rear suspension elements 1 – anti-roll bar; 2 – front arm of rear...

Front stabilizer bar
Removal 1. Raise the front of the car and secure it on stands. Remove the front wheels. 2. Unscrew three bolts and remove the right and left front fender guards. 3. Unscrew the stabilizer links from the lower arms of...

Front pillar — removal and installation
Removal 1. Raise the front of the vehicle and secure it on stands. Remove the relevant front wheel. 2. Disconnect the brake hose from the bracket on the front strut. 3. If the vehicle is equipped with an anti-lock...

Front pillar repair
Front suspension strut parts 1 – upper support; 2 – bearing (models since 1995); 3 – spring seat (models since 1995); 4 – protective cover; 5 – cylindrical spring; 6 – buffer; 7 – bottom gasket; 8 – shock absorber 1....

Lower Front Suspension Arm — Removal and Installation
Removal 1. Raise the front of the vehicle and secure it on stands. Remove the relevant front wheel. 2. Unscrew the stabilizer bar link from the front suspension lower arm. 3. Unscrew the bolts securing the ball joint to...

Replacing the lower hinge of the front suspension
1. Raise the front of the car and secure it on stands. Remove the front wheel. 2. Unscrew the bolts securing the ball joint to the lower arm of the front suspension and, using a pry bar, separate the lower arm from the...

Steering knuckle — removal and installation
Removal 1. Raise the front of the car and secure it on stands. Remove the front wheel. 2. Remove the caliper without disconnecting the brake hose. Using a soft wire, hang the caliper on the front strut, remove the brake...

Rear stabilizer bar
1. Raise the rear of the car and secure it on stands. Remove the rear wheels. 2. Unscrew the stabilizer link from the stabilizer. 3. Remove the bolts securing the stabilizer bar clamps to the rear beam and remove the...

Rear suspension strut — removal and installation
Removal 1. On sedan models, remove the rear seat and side trim. On wagon models, remove the rear seatback and side trim. 2. Raise the rear of the car and secure it on stands. Remove the rear wheels. 3. On station wagon...

Rear suspension longitudinal rod
1. Raise the rear of the car and secure it on stands. Remove the rear wheel. 2. Unscrew the bolt securing the longitudinal rod to the hub mounting element. 3. Unscrew the bolt securing the front part of the longitudinal...

Rear suspension arms — removal and installation
Removal 1. Raise the rear of the vehicle and support it on stands. 2. Unscrew the bolt securing the longitudinal rod to the hub mounting element. 3. On station wagon models, unscrew the pressure limiting Valve spring...

Rear Suspension Hub — Removal and Installation
Removal Rear Suspension Hub Parts 1 – hub; 2 – hub bolt; 3 – bearing; 4 – nut; 5 – rear suspension hub assembly; 6 – O-ring round section; 7 – support; 8 – brake disc; 9 – brake drum 1. Raise the rear of the car and...

Rear Hub Fastener — Removal and Installation
Removal Rear suspension hub fastener 1 – wheel speed sensor; 2 – rear suspension fastening element; 3 – support; 4 – hub; 5 – brake disc; 6 – O-ring round section 1. Raise the rear of the car and secure it on stands....

Wheels and tires — check and rotation
Tire designations Please note: If there is an M+S designation between data 14 and 89, these are winter profile tyres. Decoding of the designation 195/70 HR 14 89 H 195 tire width in mm 70 height to width ratio of the...

Wheel alignment angles
Wheel alignment angles Wheel alignment angles have a significant impact on vehicle stability, tire wear, and fuel consumption. The following wheel alignment angles are distinguished: Camber is the tilt of the wheel in a...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Similar sections for other Toyota models

➥ Car suspension Toyota Corolla Verso 3 (2004-2009)
➥ Car suspension Toyota Duet (1998-2004)
➥ Car suspension Toyota Cruiser 70 (1985-1996, diesel)
➥ Car suspension Toyota Carina T190 (1992-1996)
➥ Car suspension Toyota 4Runner N120 (1989-1995)
➥ Car suspension Toyota RAV 4 XA10 (1994-2000)

Link in different formats to this article

TEXTHTMLBB Code