Specifications for mechanical transmission Gearshift lever preload Gearshift lever preload 0.05 - 0.15 kg Tightening torques Bolts of fastening of a transmission to the engine: – M 10 40 Nm – M 12 55 Nm
Gear shift cables Shift lever and cables 1 – a cable of a gear change; 2 - retainer; 3 - washer; 4 - spring ring; 5 - bushings; 6 - plate; 7 – gear lever handle; 8 - gear lever; 9 - gasket; 10 - thrust ring; 11 - nest; 12 - gasket; 13 -...
Gear Lever — Adjustment Recommendation Before installing the center console on 1992 and 1993 models, use a spring scale to check the force required to move the shift lever. If the shift lever movement force is not correct, remove the shift...
Reversing light switch 1. When the ignition and reverse gear are switched on, the reverse lights should light up. If not, check the ignition switch, fuse, reversing lamps and reversing lamp circuit. 2. To test the operation of the reversing...
Removal and installation of a manual transmission Removing 1. Remove the hood. 2. Reduce the pressure in the fuel system. 3. Remove the ground wire from the battery. Attention! If your radio has an anti-theft code, check that you have the pairing codes before...
Manual transmission repair The gearbox is a very complex unit and it must be repaired in a specialized workshop.