Warning! Before replacing an external light bulb, check the corresponding electrical circuit and fuse. Do not touch the glass bulb of the bulb with bare hands. The fingerprint evaporates and settles on the reflector, resulting in poor lighting. Always replace defective bulbs with bulbs of the same type. Wipe off any accidental touch stains with a clean, lint-free cloth or alcohol.
1. Open the hood.
2. Remove the ground cable from the battery.
3. Release the retainer and disconnect the electrical connector from the bulb holder.
4. Turn the headlight bulb holder counterclockwise and remove it from the headlight housing.
5. Install the bulb holder with the new bulb into the headlight and turn it clockwise until it locks into place.
6. Connect the electrical connector to the headlight bulb holder.