Pic. 7.60. Checking the switch of the central locking of the front door on the passenger side
Check up presence of conductivity of a signal between conclusions of a socket and the switch of the central lock in positions specified in the table.
Also make sure that there is no conduction signal in position «turned off» - «OFF».
If the conductivity does not match the data in the table, replace the switch.
Standard check
Check the operation of the passenger door lock electric drive in the positions indicated in the table.
Connect the positive terminal of the battery to the terminal «4» and negative terminal - with output «1», make sure that the latch of the lock has moved to the position «LOCK». Reverse the polarity of the connector pins and make sure that the latch of the lock has moved to the position «UNLOCK».
Pic. 7.61. Checking the operation of the electric drive of the lock of the front door on the passenger side
If the operation of the actuator is not as described, replace the lock assembly.
Standard check
Check for continuity between the connector pins and the passenger side door lock switch in the positions shown in the table.
If the conductivity does not match the data in the table, replace the lock assembly.