Fig. 8.62. Rear combination light glass mounting bolts
Unscrew the three bolts securing the rear light diffuser (Fig. 8.62).
Disconnect the power connectors from the light on the trunk side.
Pull the headlight diffuser towards you and remove it.
Remove the rear trunk trim.
Fig. 8.63. Removing the protective cover of the rear light
Unscrew the three nuts and remove the rear light protective cover (Fig. 8.63).
Fig. 8.64. Removing the rear light protective gasket
Remove the rear light protective gasket (Fig. 8.64).
Fig. 8.65. Removing the rear combination light bulb holders
Remove the three combination lamp bulb sockets by turning them in the directions shown by the arrows in Figure 8.65.
Disconnect the power supply wire connectors of the combination lamps and remove the sockets.
Fig. 8.66. Removing the rear turn signal lamp sockets
Remove the rear turn signal bulb socket by turning it in the direction indicated by the arrow in Figure 8.66.
Disconnect the lamp power cord connectors and remove the lamp holders.
Install in the reverse order of removal.